Our guide provides complete step-by-step information for RO Water Purifier cleaning and maintenance.

Reverse Osmosis (RO) water purifiers have become an essential appliance in many homes, providing clean and safe drinking water. Regular cleaning and maintenance is essential to ensure that your RO system continues to work efficiently and provide you with high quality water. In this step-by-step guide, we will walk you through the DIY (Do It Yourself) process of cleaning and maintaining your RO water purifier.

Tools and Materials Required:

➤ Screwdriver
➤ Wrench or Pliers
➤ Soft Cloth or Sponge
➤ Bucket
➤ Cleaning Brush
➤ New Filters (if required)
➤ Water Pressure Gauge (optional)

Step 1: Turn Off the Power and Water Supply

Safety first before you begin any maintenance, disconnect the power supply to your RO water purifier. Additionally, turn off the water supply by closing the inlet valve. This is important for safety reasons as you will be working with electrical components during the cleaning and maintenance process. It will prevent any potential leaks or accidents.

Step 2: Drain the RO Tank

Place a bucket under the RO tank's faucet to catch any excess water, and then open the faucet to drain the tank completely. This helps relieve any pressure within the system.

Step 3: Remove the Filters

Depending on your RO system's design, you may have one or more pre-filters. Open the filter housings using a wrench or pliers and remove the pre-filter and post-filter cartridges. Make sure to note the order and orientation in which they are installed. Follow the manufacturer's instructions to remove these filters.

Step 4: Clean the Filters

Rinse the pre-filter and post-filter cartridges under running water to remove any loose sediment or debris. If the filters are not heavily clogged, clean them thoroughly with mild detergent or vinegar solution. If the filters are heavily clogged, it's advisable to replace them with new ones.

Step 5: Clean the RO Membrane

The RO membrane is a crucial component of your water purifier that requires periodic maintenance. Locate the RO membrane housing and carefully remove the membrane according to manufacturer guidelines. Be gentle, as the membrane is delicate. Rinse the membrane gently under cold water to remove any accumulated dirt or impurities. Do not use soap or cleaning agents, use an appropriate membrane cleaner or soaking solution recommended by your RO system's manufacturer.

Step 6: Sanitize the RO Tank

Over time, bacteria can accumulate inside your RO system's storage tank. To sanitize it, mix a solution of 1-2 tablespoons of unscented household bleach with a gallon of water. Pour this solution into the RO tank and let it sit for about 10-15 minutes. Drain the tank completely to remove any residual bleach.

Step 7: Replace Filters (If Necessary)

Check if any of your filters have reached their recommended lifespan as specified by the RO system's manufacturer. If so, replace them with new ones to ensure efficient filtration.

Step 8: Reassemble the RO System

Once you have completed all the cleaning and maintenance steps, reassemble the RO system components following the manufacturer's instructions. Put the RO membrane back into its housing and secure it properly. Reinstall the pre-filter and post-filter cartridges in their respective housings. Make sure all connections are tight and secure.

Step 9: Turn On the Water Supply and Power

Open the water supply valve slowly to allow the system to fill. Check for any leaks, especially around the filter housings and connections. Once the system is filled, turn on the power supply to the RO system. Allow the RO system to run for at least 15-20 minutes to flush out any residual bleach or impurities or air bubbles. Discard the initial tank of purified water to ensure it's clean. If you have a water pressure gauge, check if the pressure is within the recommended range by the RO system's manufacturer.

Step 10: Test Water Quality

After flushing, test the quality of your purified water using a TDS (Total Dissolved Solids) meter or other appropriate testing methods. This will help ensure that your DIY RO water purifier is functioning properly and providing clean, safe drinking water.

Step 11: Monitoring and Replace Filters

Keep an eye on your RO system's performance. Perform this cleaning and maintenance routine every 3-6 months to keep your RO water purifier in top working condition. Replace the pre-filter and post-filter cartridges as recommended by the RO system's manufacturer, typically every 6-12 months. The RO membrane may need replacement every 2-3 years, depending on usage and water quality.

Bonus Tip - Create a regular maintenance schedule for your RO system and stick to it. Whether it is every three, six, or twelve months, consistent maintenance ensures that your water purifier operates efficiently and provides the best quality water. Set calendar reminders or use smartphone apps to keep track of maintenance dates, filter replacements, and cleaning routines. This proactive approach helps prevent potential issues and guarantees clean, safe drinking water year-round.

Conclusion

By following above these steps, you can effectively clean and maintain your RO water purifier, ensuring that it continues to provide you with safe and great-tasting drinking water. Regular maintenance not only prolongs the life of your system but also guarantees the purity and quality of the water you consume.

For any kind of information related to RO water purifier repair and maintenance in Jamshedpur, feel free to call us at +91 808 434 2167 or submit enquiry form. We would be happy to help you find the best comfort solution for your needs.

Things To Remember

However, it is important to note that RO Water Purifier cleaning and maintenance can be little complex, and professional assistance is recommended if you lack experience or confidence. You can choose a reliable RO Water Purifier repair and maintenance service provider like OOTS. OOTS provides RO Water Purifier Installation Service in Jamshedpur, RO Water Purifier Repair Service in Jamshedpur, RO Water Purifier Servicing in Jamshedpur and RO Water Purifier Maintenance Service in Jamshedpur city and surrounding areas within 90 minutes. For service booking you can call +91 808 434 2167 and visit the OOTS service booking portal.

Choose the Right Laundry Service for Your Needs Read Now »

Declaration: Information appearing in this blog including image or video is for general awareness or knowledge only, based on online research and OOTS service experience.